CVP Central Vacuum Systems
Model: Simplex: CVP-A5S through CVP-A130S; Duplex: CVP-A5D through CVP-A130D
Applications: Vacuum Packaging, Medical/Dental Vacuum, Laboratory Vacuum, Vacuum Priming, Vacuum Pressure Impregnation, Food Processing
CVP Central Vacuum Systems provide a remote supply of plant vacuum which can be located away from the production area or vacuum outlets, thus reducing noise and heat in the work area. The systems feature the a single-stage A Series liquid ring pumps in either a simplex (one pump) or duplex (two pumps) design. The energy-efficient systems are designed to operate automatically, with the pump(s) starting when the plant vacuum demand increases, and stopping when the demand is met. Vacuum is maintained by means of pressure switches which cycle the pump(s). These systems require only water and electric power connections. A solenoid valve on the seal water line provides water whenever the pump(s) cycle.
Share
Recovering the sealant to your liquid ring vacuum system can be an important part of your process. To simplify this we offer different sealant recovery systems that are fully assembled and ready to install. These systems include the required piping, assembly, gauges, and separator tank.
- Available Sealant Recovery Systems:
- Partial Recovery System (PSR)
- Full Recovery System (FSR)
- Once Through, No Sealant Recovery (NSR)
- “Abuser-friendly” axial flow pump design
- Quiet, vibration-free operation
- Bronze construction liquid ring pumps, TEFC motor(s)
- Galvanized steel ASME code (100 PSIG [6.89 bar g]) vacuum receiver
- Air discharge water separator silencers for quiet operation
- Flow ranges:
- Simplex: 10 - 125 CFM (17 - 212 m³/h)
- Duplex: 20 - 250 CFM (34 - 425 m³/h)
- Fully instrumented including
- Adjustable vacuum switch
- NEMA 4 control panel
- Tank level sight gauge
- Thermostatic valve
- Solenoid valve
- Vacuum gauge
Features
Recovering the sealant to your liquid ring vacuum system can be an important part of your process. To simplify this we offer different sealant recovery systems that are fully assembled and ready to install. These systems include the required piping, assembly, gauges, and separator tank.
- Available Sealant Recovery Systems:
- Partial Recovery System (PSR)
- Full Recovery System (FSR)
- Once Through, No Sealant Recovery (NSR)
- “Abuser-friendly” axial flow pump design
- Quiet, vibration-free operation
- Bronze construction liquid ring pumps, TEFC motor(s)
- Galvanized steel ASME code (100 PSIG [6.89 bar g]) vacuum receiver
- Air discharge water separator silencers for quiet operation
- Flow ranges:
- Simplex: 10 - 125 CFM (17 - 212 m³/h)
- Duplex: 20 - 250 CFM (34 - 425 m³/h)
- Fully instrumented including
- Adjustable vacuum switch
- NEMA 4 control panel
- Tank level sight gauge
- Thermostatic valve
- Solenoid valve
- Vacuum gauge