Surpresseurs PD Plus 5500
Model: 5507, 5511, 5514, 5518
Applications: Solvent Distillation/Vapor Recovery, Pneumatic Conveying, Carpet Cleaning, Air Sparging, Mobile Vacuum Waste Removal, Pulp/Paper Processing, Fluid Bed Combustion, Digester Gas Processing, Pressure Boosting, Fluidization/Agitation of Dense Powders, Oil-Free Handling Fuel, Utility or Process Gases, Laser Recirculation Systems, Closed Loop Pneumatic Conveying, Steam Compression, Soil Vapor Extraction, Process Gas Boosting
Max. Vacuum: 15-17 in. Hg
Model 5500 PD PLUS heavy duty industrial blowers are designed for high performance applications, up to 18 PSI pressure or 17” Hg dry vacuum (24” Hg water injected).
Partager
Vertical & Horizontal Air Flow
This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure, high volume air is required. Les zones de joint comportent un trou de fuite pour réduire la pression du processus sur les joints à lèvre internes et apporter de l'air exempt d'huile.
Vertical & Horizontal Single Envelope Gas Service
This series is utilized in such applications as closed loop pneumatic conveying, process gas handling, or elevated pressure applications up to 100 PSIG discharge. Vent openings are tapped and plugged to prevent gas leakage. These fittings can also accept an inert gas purge for positive containment of the process gas.
Vertical & Horizontal Double Envelope Gas Service
Cette série est fabriquée conformément aux normes des laboratoires où une étanchéité quasi complète est nécessaire. In addition to the features shown on the above series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.
Fonctionnalité
Vertical & Horizontal Air Flow
This series has wide application in pneumatic conveying, wastewater treatment, and the general process industry where high pressure, high volume air is required. Les zones de joint comportent un trou de fuite pour réduire la pression du processus sur les joints à lèvre internes et apporter de l'air exempt d'huile.
Vertical & Horizontal Single Envelope Gas Service
This series is utilized in such applications as closed loop pneumatic conveying, process gas handling, or elevated pressure applications up to 100 PSIG discharge. Vent openings are tapped and plugged to prevent gas leakage. These fittings can also accept an inert gas purge for positive containment of the process gas.
Vertical & Horizontal Double Envelope Gas Service
Cette série est fabriquée conformément aux normes des laboratoires où une étanchéité quasi complète est nécessaire. In addition to the features shown on the above series, the drive shaft is mechanically sealed and the oil sumps are plugged to provide an even higher degree of leakage protection.