Anello liquido - Serie A monostadio
Modello: A5, A10, A15, A20, A75, A100, A130, A200, A300
Applicazioni: Vacuum Packaging, Extruders, Solvent Distillation/Vapor Recovery, Sterilization, Degasifiers, Evaporators, Freeze Drying, Vapor Coating, Gas Compression
Condividere
- Semplice nel design, robusto nella struttura
- Costruito per reggere nelle condizioni industriali più estreme
- Unique design allows pump to operate flooded, without damage
- Flat power curve over entire vacuum range prevents motor overload
- Assenza di contatto fra i componenti in funzione nella carcassa
- Immergere fino a 29" Hg - 25 Torr (33 mbar a)
- Increased water handling capability prevents heat build-up, extends life of single mechanical seal
- Sollecitazioni ridotte su albero e cuscinetti del motore
- Available in stainless steel, bronze, or cast iron (A200 & A300 models available in cast iron)
- Compact, close-coupled design eliminates need for interstage manifold or motor alignment
A Series pumps are not as susceptible to cavitation compared to flat plate design because the flow path through the pump is an axial flow. This allows the velocity through the pump to be unchanged and carries the air out effortlessly.
It is not unusual for these pumps to run 24/7 operation for years without maintenance.
A Series pumps are vibration-free and environmentally friendly with no oil used for lubrication, and no oil discharged to atmosphere.
Complete, self-contained systems including liquid recovery and recirculation are available.
Caratteristiche
- Semplice nel design, robusto nella struttura
- Costruito per reggere nelle condizioni industriali più estreme
- Unique design allows pump to operate flooded, without damage
- Flat power curve over entire vacuum range prevents motor overload
- Assenza di contatto fra i componenti in funzione nella carcassa
- Immergere fino a 29" Hg - 25 Torr (33 mbar a)
- Increased water handling capability prevents heat build-up, extends life of single mechanical seal
- Sollecitazioni ridotte su albero e cuscinetti del motore
- Available in stainless steel, bronze, or cast iron (A200 & A300 models available in cast iron)
- Compact, close-coupled design eliminates need for interstage manifold or motor alignment
A Series pumps are not as susceptible to cavitation compared to flat plate design because the flow path through the pump is an axial flow. This allows the velocity through the pump to be unchanged and carries the air out effortlessly.
It is not unusual for these pumps to run 24/7 operation for years without maintenance.
A Series pumps are vibration-free and environmentally friendly with no oil used for lubrication, and no oil discharged to atmosphere.
Complete, self-contained systems including liquid recovery and recirculation are available.